30×50 House Construction Cost in Bangalore
A 30×50 ft site is 1,500 sq.ft. At roughly 1,250 sq.ft built-up per floor, turnkey construction runs from about ₹20.2 lakh for a ground-floor house to ₹1.39 crore for a G+3 building, depending on floors, package and finishes.
Get a 30×50 Construction Cost Estimate
Share your plot dimensions and floors — we'll send a configuration-wise estimate.
No spam. Our team will contact you only for your house construction requirement.
A 30×50 ft plot is 1,500 sq.ft. Turnkey construction cost ranges from about ₹20.2 lakh for a ground-floor house to ₹1.39 crore for a G+3 building, driven mainly by the number of floors and the package (₹1,799–₹2,529/sq.ft, GST included). Configuration-wise costs, planning notes, rental options, timeline and FAQs are below. For the city-wide picture see construction cost in Bangalore or use the construction cost calculator.
30×50 Plot = 1,500 Sq Ft: What It Means for Cost
A 30×50 ft plot measures 1,500 sq.ft. After the front, rear and side setbacks in your sanctioned plan, we use about 1,250 sq.ft of built-up area per floor as a planning figure (a range of 1,125–1,375 sq.ft). The approved drawing gives the exact number.
Construction is costed on built-up area × package rate, so the two levers that move a 30×50 budget most are the number of floors and the package (₹1,799–₹2,529/sq.ft, GST included).
A 30×50 gives about 25% more area than a 30×40 on the same 30 ft frontage. That extra depth usually goes into a larger living-dining space, an additional bedroom or a rear sit-out, without changing the frontage-driven layout.
30×50 Construction Cost by Configuration
| Configuration | Approx. Built-up Area | Estimated Cost Range (incl. GST) | Typical Use |
|---|---|---|---|
| Ground floor only | 1,125–1,375 sq.ft | ₹20.2 lakh – ₹34.8 lakh | Single-floor family home |
| G+1 house / duplex | 2,250–2,750 sq.ft | ₹40.5 lakh – ₹69.5 lakh | 3 BHK family home or duplex |
| G+2 (owner + rental) | 3,375–4,125 sq.ft | ₹60.7 lakh – ₹1.04 crore | Owner floor + rental units |
| G+3 rental building | 4,500–5,500 sq.ft | ₹81.0 lakh – ₹1.39 crore | Rental income focus (check FAR/approval) |
Ranges apply the Dream Value (₹1,799) to Signature Home (₹2,529) rates. Civil construction only — approvals, compound wall, borewell and external works are separate. Whether a G+2 or G+3 is permitted on your plot depends on road width, FAR/FSI and parking norms. Check your own numbers with the construction cost calculator.
Bar length scaled to the upper figure of each range. Civil construction only, before approvals and external works.
30×50 G+1 Cost — Package by Package
Using ~2,500 sq.ft built-up for a 30×50 G+1:
| Package | Rate / Sq Ft | Approx. Cost (2,500 sq.ft) |
|---|---|---|
| Dream Value | ₹1,799 | ₹45.0 lakh |
| Dream Home | ₹1,919 | ₹48.0 lakh |
| Luxury Home | ₹2,129 | ₹53.2 lakh |
| Premium Home | ₹2,329 | ₹58.2 lakh |
| Signature Home | ₹2,529 | ₹63.2 lakh |
Adjust for your actual built-up area. Full specification comparison: house construction packages in Bangalore.
Planning a House on a 30×50 Site
- Extra depth: the 50 ft depth comfortably fits parking in front, a full living-dining-kitchen run and a bedroom at the rear on the ground floor.
- Duplex: 30×50 suits a G+1 duplex with an internal staircase, double-height living or a pooja space.
- Parking: plan ~180 sq.ft per car. One car plus two-wheelers usually fit in front; stilt parking frees the ground floor for living or rental use.
- Light and ventilation: a longer plot needs a courtyard, duct or skylight to bring light into the middle rooms.
Floor plans are prepared for your specific plot, orientation and family requirement. These are common patterns, not a fixed design. See architectural design.
30×50 Rental Building Configuration
On a 30×50, a G+2 or G+3 with one or two units per floor is common, often a 2BHK per floor or two 1BHKs. Plan a single well-placed staircase, parking sized to the unit count, separate meters and adequate water storage, and confirm FAR/FSI and parking norms for your plot before finalising drawings.
See also: rental building construction in Bangalore.
30×50 Construction Timeline
| Stage | Indicative Duration |
|---|---|
| Design, drawings & approval | 4–10 weeks (approval varies by authority) |
| Foundation & plinth | 3–5 weeks |
| Superstructure (per floor) | 5–7 weeks per floor |
| Masonry, plastering, waterproofing | 4–6 weeks |
| Flooring, doors, windows, painting, finishing | 8–12 weeks |
Total time depends mostly on the number of floors: each additional floor adds about 5–7 weeks of structure plus its share of finishing. Approvals, design finalisation, weather and material selection also affect the schedule.
What Changes a 30×50 Construction Cost
- Number of floors (the biggest lever) and actual sanctioned built-up area
- Package / material specification (₹1,799–₹2,529/sq.ft)
- Soil condition — soft or filled-up soil, rock or water at excavation
- Number of bathrooms and kitchens (rental units add both)
- Elevation design beyond basic plaster and paint
- Compound wall, gate, borewell, BESCOM/BWSSB, rainwater harvesting
- Approval and betterment charges for the jurisdiction
See the full breakdown on construction cost in Bangalore, or compare with the 30×40 house construction cost. To build with us, see house construction in Bangalore.
Construction Cost for Other Plot Sizes
Get a configuration-wise estimate for your 30×50 plot.
Get 30×50 Cost Estimate
